Find suitable spare parts or accessories to your Einhell products.
The Einhell TC-BD 350 pillar drill is a powerful allrounder for the workshed and for home tool requirements. Precise drill holes are no problem in future: The three-arm drill lever ensures that the pressure is perfectly dosed at all time, and the adjustable depth stop ensures precise drill holes. The sturdy base provides the equipment with good stability. The Einhell TC-BD 350 pillar drill has a powerful 350 W rating and a 5-step adjustable spindle speed ranging from 580 to 2650 rpm. For a wide range of drill holes the drill table can be tilted and swiveled up to 45° degrees on both sides. The height of the drill table is infinitely adjustable and requires no tools for adjustment. Thanks to the B16 drill chuck mount the pillar drill can drill into the selected material to a depth of 50 millimeters using drill bits with diameters ranging from 1.5-13 millimeters. A folding chip guard provides safety while drilling. The ON/OFF switch with zero voltage trip serves as a restart safeguard. The drill spindle with ball bearings is designed for long-lasting use.
|Mains supply||230 V | 50 Hz|
|Max. power (S2 | S2time)||350 W | 15 min|
|Spindle speed||580 min^-1 - 2650 min^-1|
|Number of speed steps||5 settings|
|Drill table tiltable||45 ° - 45 °|
|Drill chuck mount||B16|
|Drill diameter||1.5 mm - 13 mm|
|Max. drilling depth||50 mm|
Einhell ne zagotavlja, da objavljene ocene prihajajo od potrošnikov, ki so dejansko uporabili ali kupili izdelke ali storitve.
Product was added to the comparison list.Open comparison list