Find suitable spare parts or accessories to your Einhell products.
TE-HA 2000 E
The Einhell hot air gun TE-HA 2000 E produces the correct temperature, be it for removing old lacquer and paint, for fitting plastic tubes, or for heating up metal on soldering jobs. With a rating of 2000 W, this hot air gun is a tried-and-tested helper during various work steps requiring heat, be it 50 or as much as 550 degrees. A large adjusting wheel lets you set the temperature to nine different levels, while a three-setting switch controls the required air flow from 250 to 500 liters per minute. An additional cold setting caters for rapid cooling of hot metal parts in order to change the nozzle. A flat surface is provided on the hot air gun for safe placement during stationary use. A reducer nozzle, a wide-jet nozzle, a reflector nozzle and a window nozzle are all supplied as standard accessories for maximum versatility on all tasks.
|Mains supply||220-240 V | 50 Hz|
|Temperature at setting 1||50 °C|
|Temperature at setting 2||50-550 °C|
|Temperature at setting 3||50-550 °C|
|Airflow rate at setting 1||250 L/min|
|Airflow rate at setting 2||250 L/min|
|Airflow rate at setting 3||500 L/min|
Pruduct was added to the comparison list.Open comparison list