productimage
special_packing
detail_image
detail_image
detail_image
detail_image
detail_image
detail_image
detail_image
detail_image
detail_image
detail_image
example_usage
productimage
special_packing
detail_image
detail_image
detail_image
detail_image
detail_image
detail_image
detail_image
detail_image
detail_image
detail_image
example_usage
Vrtalno kladivo

TC-RH 800 E

Številka artikla:4257920EAN: 4006825581522
  • Pneumatic hammer mechanism
  • SDS-Plus chuck
  • Functions: hammer drilling / drilling / chiseling / chisel lock
  • Electronic speed control with speed selector
  • Reverse facility
  • Metal drill depth stop
  • Softgrip
  • Additional handle
  • Overload slip coupling
  • Hand guard
  • Smooth, low vibration operation
  • Transport and storage case
Oglejte si več informacij
productimage
Opis izdelka

The smooth-running, low-vibration TC-RH 800 E hammer drill with pneumatic hammer action is a versatile helper which provides very good service to DIY enthusiasts on building and renovation jobs. It is equipped with all four functions needed for universal use: hammer drilling, drilling, and chiseling with and without chisel lock. The SDS-Plus chuck enables drill bits and chisels to be changed without tools, and together with the powerful motor it develops a high impact force so that the tool leaves its mark even on tough assignments. For sensitive drilling without hammer action the TC-RH 800 E features electronic control with speed preselection. A sturdy, adjustable drilling depth stop made of metal enables exact, repeat drilling depths. High safety during operation is assured by an overload slip coupling which reacts immediately to any sudden jamming of the bit. The reversing facility is welcome on screwdriving jobs and also makes it easier to pull back out of drilled holes. A large soft grip zone, a practical hand guard and an additional handle with anti-twist lock ensure safe and comfortable handling of the machine. The TC-RH 800 E is stored neatly and safely in a practical transport and storage case.

Tehnični podatki

Mains supply230-240 V | 50 Hz
Power800 W
Idle speed0-1000 min^-1
Impact rate0-5180 min^-1
Impact power2.5 J
Tool holderSDS-plus
Drilling capacity in concrete26 mm
Sorodni prenosi
Einhellovo službo za pomoč strankam lahko kontaktirate neposredno. Poskrbimo za vaše zahteve po informacijah o izdelkih, nadomestnih delih in popravilih.Pomagamo vam pri vseh vprašanjih v zvezi z vašim izdelkom - pred nakupom, med njim in po njem.

Ocene strank

Einhell ne zagotavlja - z izjemo primerov "Preverjenega nakupa" - da objavljene ocene prihajajo od takšnih potrošnikov, ki so izdelke dejansko uporabljali ali kupili.